pH and Electrochemistry Meter Accessories
Hach Company KS110 KCl Solution 3M 500 mL
KS110 KCl Solution-3M-500 mL (Radiometer Analytical)Filling and storage solution for combined/reference electrodes
Oakton by Cole-Parmer Submersible 3' L pH Probe, DJ/ABS/100Ohm RTD; Tinned/BNC
Submersible electrodes operate from 32 to 176°>F (0 to 80°>C). Submerse up to the cable. Measure pH from 0 to 13. Electrodes are potted in a 3 ft L x 1-1/16'' diameter ABS sheath. Ideal for measurements in open containers such as tanks or troughs.
Cole-Parmer Solution Grounded pH Probe, DJ/PPS/100Ohm RTD; Plug/BNC
These electrodes offer solution ground, PTFE references with double junctions and polymerized gel. All models include a 10-foot cable with BNC pH connector and Ryton housing with 3/4 inch NPT(M) threads.
Oakton by Cole-Parmer sealed Tuff Tip Electrode, DJ for Orion A
Epoxy-body pH electrodes compatible with Orion A-Series meters.
Cole-Parmer pH sensor; single-junction, BNC
In-line or submersible electrodes with probe guard operate from 23 to 176°>F (-5 to 80°>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
Oakton by Cole-Parmer self-cleaning pH electrode, PPS housing, 100 Ohms Pt RTD
There will be no further buildups with this self-cleaning electrode cable. Its flat surface prevents buildups, while fluid flow cleans surface for longer life. It can be used with most meters and controllers. The BNC connector and ATC element work with a variety of units. Its double junction is for difficult applications.
Cole-Parmer Single-Junction ORP Electrode, Platinum Sensor, 10-ft Cable 05994-21
ORP electrodes measure oxidation/reduction levels in plating baths, waste water monitoring, and more. Use platinum-band electrodes for general-purpose applications from 23 to 212°>F (-5 to 100°>C). Use gold-disc electrodes for solutions containing cyanide from 23 to 230°>F (-5 to 110°>C).
Chemglass Life Sciences pH Probe, with K8, 12 x 120mm
pH Range: 0-12 Electrodes are filled with gel reference electrolyte under a pressure of 2. 5 bar Pressure Range: From vacuum up to a process of maximum 36PSI (2. 5 bar) Temperature Range: Steam sterilization/autoclavable to 266 degreesF (0 to 130 degreesC) In-situ sterilization: Up to 100 cycles under standard conditions Fully autoclavable or in-situ sterializable
Bellco Glass, Inc. pH Probe W/VP,12x120mm With VP connector - Ingold
Mettler Toledo ph probe – inpro seriesLow-maintenance ph-electrodesWith vario pin connectionMounting diameter 12mmInsertion length 120mmPh range 012Temperature range 140cPressure resistance bar up to 4 bar over pressurePressure resistance psi up to 58psi over-pressure--Diaphragm ceramic
Cole-Parmer Insertion/Submersion pH Probe; SJ/CPVC/100Ohm RTD; Plug/BNC
In-line or submersible electrodes with probe guard operate from 23 to 176>F (-5 to 80>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
Chemglass Life Sciences pH Probe, with K8, 12 x 425mm
pH Range: 0-12 Electrodes are filled with gel reference electrolyte under a pressure of 2. 5 bar Pressure Range: From vacuum up to a process of maximum 36PSI (2. 5 bar) Temperature Range: Steam sterilization/autoclavable to 266 degreesF (0 to 130 degreesC) In-situ sterilization: Up to 100 cycles under standard conditions Fully autoclavable or in-situ sterializable
Cole-Parmer Oakton Replacement pH/Con/Temp Electrode with 10 ft Cable for PC10 Meter
Replacement pH/Con/Temp electrode w/10-ft cable for Oakton PC10 meter